Click to enlarge
SDEC 81kW Diesel Engine 4ZTAA4.1-G22
SDEC 81kW Diesel Engine 4ZTAA4.1-G22
Back to products
SDEC 253kW Diesel Engine 6DTAA8.9-G23
SDEC 253kW Diesel Engine 6DTAA8.9-G23

SDEC 204kW Diesel Engine 6DTAA8.9-G21

GET A QUOTE

Need help choosing the right Product? Call us today!

Bradley: +27 62 743 5089
Ruan: +27 66 511 2009
Werner: +27 84 572 6178

Stepping up into heavy-duty infrastructure territory, the SDEC 204kW Diesel Engine 6DTAA8.9-G21 is a formidable 8.82L inline 6-cylinder powertrain engineered for high-capacity prime and standby installations. Belonging to SDEC’s highly acclaimed D Series heavy industrial platform, this six-cylinder beast is built specifically to drive large-scale 200kVA to 220kVA generator assemblies. By combining a heavy-duty turbocharger with a dedicated air-to-air charge air cooler (CAC), it maintains massive torque reserves and exceptionally stable voltage regulation across large commercial properties, mining nodes, and continuous manufacturing lines.

Delivering a massive 204kW standby output at 1500 RPM (50Hz), this engine easily commands severe block load variations without shedding frequency. It features a wet-liner block design, a generous 19-litre oil capacity for prolonged thermal stability, and a robust 24V electrical architecture. This ensures flawless start up and sustained performance under the demanding environmental stresses found across South African industrial zones and remote Sub-Saharan fields.

LiFeTIDE provides comprehensive engineering integration advice, immediate regional parts availability, and prompt cross-border delivery.

SDEC
RELIABLE POWER GENERATION

SDEC was founded in 1947 and is a generator manufacturer and supplier. They are ISO9001, QS9000 and TS16949 certified, which is testament to their quality and reliable performance.

ABOUT THE ENGINE
GENERAL SPECIFICATIONS

SDEC 204kW Diesel Engine

The SDEC 6DTAA8.9-G21 marks a transition into true heavy industrial engineering, utilising a robust inline six-cylinder layout with an active charge air aftercooling system. This configuration significantly lowers induction air temperatures before combustion, resulting in cleaner power strokes, higher fuel density, and superior component longevity under continuous duty cycles. The high-capacity cast-iron block features cross-flow cylinder head geometry and structural wet-liner sleeves that keep cooling fluids in constant contact with the cylinder walls, preventing heat fatigue and protecting against structural distortion during long utility outages.

1-3-h-series-industrial-diesel-engine_02
1-3-h-series-industrial-diesel-engine_05
1-3-h-series-industrial-diesel-engine_04
1-3-h-series-industrial-diesel-engine_03
ENGINE DATA SHEET

Industrial Power Architecture & Reliability

Designed with an integrated cylinder head and a high-strength cast-iron block, the 6DTAA8.9-G21 utilises premier international component brands to ensure absolute mechanical integrity under rigorous load cycles. Its advanced, high-efficiency four-valve layout guarantees optimal fuel atomisation and torque delivery, making it the preferred choice for local generator builders requiring reliable prime and standby power for commercial, agricultural, and industrial infrastructure. With a simplified layout that drastically reduces part-count complexity, this engine lowers long-term operational overhead while maximising field uptime under demanding African environmental conditions.

SDEC 204kW Engine Technical Features

  • Advanced 4-Valve Architecture: Features an integrated cylinder head design and a heavy-duty cylinder block, incorporating tier-one international components to maximise thermal efficiency and structural longevity.

  • Automotive-Grade Quality Infrastructure: Manufactured to the strict quality control matrix of SAIC Motor and verified by world-class German automotive production systems, ensuring absolute product consistency and balanced performance.

  • Simplified Mechanical Framework: The structural blueprint relies on integrated components, reducing total part count compared to conventional diesel powertrains. This results in simplified field maintenance and lower spare parts overhead.

  • Strong Environmental Resilience: Engineered for instantaneous starting capability without an intake pre-heater down to minus 10°C, and extending down to minus 30°C utilising an auxiliary heating device for absolute grid-independence in any environment.

  • Regulated Emission Compliance: Engineered to meet strict global industrial standards, matching the Off-Road Stage II emission framework for cleaner, highly efficient fuel consumption profiles.

PRODUCT SPECIFICATIONS

Weight 740 kg
Dimensions 142.2 × 76.2 × 118.6 cm
Brand

SDEC
Product Type

Diesel Engine
Prime Power (kW)

185kW
Standby Power(kW)

204kW
Prime Power

200kVA
Standby Power

220kVA
Engine Type

In-line, 4 Strokes, 4 Valves, Water-cooled
Aspiration

Turbo Charged with Aftercooler
Cylinder Type

Dry Liner
Cylinders

6 Cylinders
Bore × Stroke

114mm x 144mm
Displacement

8.82L
Compression Ratio

18 : 1
Firing Order

1-5-3-6-2-4
Injection Timing

7.5°BTDC
Flywheel Housing (SAE)

SAE NO.2
Flywheel Clutch Size (Inches)

SAE NO.11.5（geartooth number:125）
Fuel Consumption @ 100%

44.1 l/h
Fuel Consumption @ 75%

32.8 l/h
Fuel Consumption @ 50%

22.8 l/h
Fuel Consumption @ 25%

13.4 l/h
Injection Pump

Longkou Inline “P” Type
Governor

Electronic Regulator
Feed Pump

Mechanical Type
Injection Nozzle

Multi hole Type
Opening Pressure

250 kg/cm2
Fuel Filter

Full Flow, Cartridge Type
Fuel Type

Diesel Fuel Oil
Mechanism Type

Overhead Valve
Number of Valves

Intake: 1, Exhuast: 1 Per Cylinder
Valve Lashes - Cold

Intake: 0.30mm, Exhaust: 0.50mm
Lubrication Method

Fully Forced Pressure Feed Type
Oil Pump

Gear Type Driven by Crankshaft
Oil Filter

Full Flow, Cartridge Type
Oil Pan Capacity

High Level: 19 litres, Low Level: 15 litres
Lubrication Angularity Limit

Front Down: 25 degrees, Front Up: 35 degrees, Side to Side: 35 degrees
Lubrication Oil

Refer to Operation Manual
Intake Valve Timing

Opening: 22.5°BTDC, Closing: 34.5°ABDC
Exhaust Valve Timing

Opening: 67.5°BBDC, Closing: 25.5°ATDC
Cooling Method

Fresh Water Forced Circulation
Water Capacity (Engine Only)

12 litres
Lid Minimum Pressure

70kPa
Water Pump

Centrifugal Type Driven by Belt
Water Pump Capacity

200L/min
Thermostat

Wax–pellet Type. Opening Temp. 82°C, Full Open Temp. 93°C
Cooling Fan

Plastic Blower. 762 mm diameter, 10 blades
Heat Rejection to Coolant

18.6 kcal/sec
Exhaust Gas Flow

28.3m3/min
Exhaust Gas Temperature

600 °C
Charging Generator

28V×55A
Voltage Regulator

Built-in IC Regulator
Starting Motor

24V×7.5 kW
Battery Voltage

24V
Battery Capacity

180 AH
Categories: ,
From Leading Global Facilities Straight to Your Project Site

World-Class Manufacturing, Streamlined Distribution

At LiFeTIDE, we bypass intermediate brokers to align your business directly with the world’s most advanced powertrain and electrical component manufacturing facilities. We secure tier-one access to state-of-the-art production lines including the globally acclaimed SDEC and Baudouin facilities.

Every engine, alternator, and component we source is manufactured under stringent international quality controls and rigorously tested for the harsh operational profiles of Sub-Saharan Africa.

From individual component integration for local generator builders to turnkey commercial 3-phase setups, our managed logistics network ensures seamless factory-to-site delivery, guaranteed stock availability, and uncompromised engineering integrity.

Seamless Supply and Delivery Channels

Sub-Saharan Logistics Infrastructure

Managing heavy engineering components and high-capacity standby power systems across African borders requires absolute precision, established freight channels, and ironclad regulatory compliance.

At LiFeTIDE, our logistics framework is built to handle the complex weight of heavy industrial transport. We coordinate the entire lifecycle of your asset from secure international factory container loading and local port clearance to heavy-haul overland distribution.

Whether you are a generator builder in Johannesburg requiring bulk engine shipments or a registered trade dealer anywhere in Southern Africa, we have you covered.

Our cross-border freight routes are fully optimised to navigate customs frameworks, minimise port delays, and guarantee predictable delivery timelines directly to your facility or project site.

RELATED PRODUCTS

FREQUENTLY ASKED QUESTIONS

Does the price include installation?

No, installation is not included in the price. Any qualified electrician can install the kit and provide a Certificate of Compliance (COC) for the installation as per legislation.

Do LiFeTIDE offer installation?

No, LiFeTide do not offer any installation services, but, any qualified electrician can install the Pre-Configured LiFeTIDE Loadshedding Kit.

Does the price include delivery?

Delivery is not included in any of the prices. However, delivery will be calculated in your cart at checkout based on your location and product selection.

Tell me about the Warranty

Our product warranty  is detailed on each product page and as per our standard terms if registered on our warranty form along with a valid COC and images of the installation. It is a limited warranty. The goods need to be returned to us as per our standard Terms and Conditions of Sale.

Price validity

All pricing is valid while stocks last as reflected on this website page for the product listed, as specified herein and subject to change without prior notification.