Click to enlarge
SDEC 24kW Diesel Engine 4Z2.7-G21
SDEC 24kW Diesel Engine 4Z2.7-G21
Back to products
SDEC 44kW Diesel Engine 4ZT3.2-G21
SDEC 44kW Diesel Engine 4ZT3.2-G21

SDEC 35kW Diesel Engine 4Z3.2-G21

Need help choosing the right power equipment? Call us today!
Werner: +27 84 572 6178

Purpose-built for commercial emergency power systems, light industrial workshops, and agricultural borehole pumping arrays, the SDEC 35kW Diesel Engine 4Z3.2-G21 is an inline, four-stroke water-cooled G-Drive engine providing a highly efficient 3.2L displacement setup. Positioned as a versatile mechanical powerhouse within SDEC’s small-displacement infrastructure line, this turbocharged four-cylinder configuration is precision-engineered to run as the primary drive for compact 31kVA to 34.5kVA generator units requiring an exceptional power-to-weight ratio.

Delivering a highly reliable standby output of 35kW at 1500 RPM (50Hz) , this engine adapts quickly to instantaneous electrical demand fluctuations. Constructed with an integrated wet-liner block layout to maximise thermal equilibrium, it handles the demanding, dust-heavy conditions typical of South African off-grid setups and regional African utilities.

LiFeTIDE provides complete lifetime integration advice, extensive spare component availability, and reliable regional shipping networks to guarantee operational uptime.

SDEC
RELIABLE POWER GENERATION

SDEC was founded in 1947 and is a generator manufacturer and supplier. They are ISO9001, QS9000 and TS16949 certified, which is testament to their quality and reliable performance.

ABOUT THE ENGINE
GENERAL SPECIFICATIONS

SDEC 24kW Diesel Engine

The SDEC 4Z3.2-G21 utilizes a space-efficient inline four-cylinder configuration paired with a robust wet-liner system. By exposing the cooling jackets directly to the outer surface of the cylinder sleeves, this structural framework offers superb cylinder temperature uniformity and high heat rejection capacity during prolonged peak standby operations. The overhead valve mechanism (1 intake and 1 exhaust valve per cylinder) is driven via a camshaft gear assembly, cutting potential component strain and ensuring maximum physical endurance under the most challenging operating schedules.

1-3-h-series-industrial-diesel-engine_02
1-3-h-series-industrial-diesel-engine_05
1-3-h-series-industrial-diesel-engine_04
1-3-h-series-industrial-diesel-engine_03
ENGINE DATA SHEET

Industrial Power Architecture & Reliability

Designed with an integrated cylinder head and a high-strength cast-iron block, the 4Z3.2-G21 utilises premier international component brands to ensure absolute mechanical integrity under rigorous load cycles. Its advanced, high-efficiency four-valve layout guarantees optimal fuel atomisation and torque delivery, making it the preferred choice for local generator builders requiring reliable prime and standby power for commercial, agricultural, and industrial infrastructure. With a simplified layout that drastically reduces part-count complexity, this engine lowers long-term operational overhead while maximising field uptime under demanding African environmental conditions.

SDEC 35kW Engine Technical Features

  • Advanced Architecture: Features an integrated cylinder head design and a heavy-duty cylinder block, incorporating tier-one international components to maximise thermal efficiency and structural longevity.

  • Automotive-Grade Quality Infrastructure: Manufactured to the strict quality control matrix of SAIC Motor and verified by world-class German automotive production systems, ensuring absolute product consistency and balanced performance.

  • Simplified Mechanical Framework: The structural blueprint relies on integrated components, reducing total part count compared to conventional diesel powertrains. This results in simplified field maintenance and lower spare parts overhead.

  • Strong Environmental Resilience: Engineered for instantaneous starting capability without an intake pre-heater down to minus 10°C, and extending down to minus 30°C utilising an auxiliary heating device for absolute grid-independence in any environment.

  • Regulated Emission Compliance: Engineered to meet strict global industrial standards, matching the Off-Road Stage II emission framework for cleaner, highly efficient fuel consumption profiles.

PRODUCT SPECIFICATIONS

Weight 260 kg
Dimensions 95.3 × 52.2 × 72.8 cm
Brand

SDEC
Product Type

Diesel Engine
Prime Power (kW)

32kW
Standby Power(kW)

35kW
Prime Power

31kVA
Standby Power

34.5kVA
Engine Type

In-line, 4 Strokes, 4 Valves, Water-cooled
Aspiration

Turbo Charged
Cylinder Type

Dry Liner
Cylinders

4 Cylinders
Bore × Stroke

98mm x 105mm
Displacement

3.2L
Compression Ratio

18 : 1
Firing Order

1-3-4-2
Injection Timing

14° – 17°
Flywheel Housing (SAE)

SAE NO.4
Flywheel Clutch Size (Inches)

SAE NO.7.5 (gear tooth number:115)
Fuel Consumption @ 100%

8.6 l/h
Fuel Consumption @ 75%

6.5 l/h
Fuel Consumption @ 50%

4.4 l/h
Fuel Consumption @ 25%

2.6 l/h
Injection Pump

KangDa
Governor

Electronic Regulator
Feed Pump

Mechanical Type
Injection Nozzle

Multi hole Type
Opening Pressure

24MPa
Fuel Filter

Full Flow, Cartridge Type
Fuel Type

Diesel Fuel Oil
Mechanism Type

Overhead Valve
Number of Valves

Intake: 1, Exhuast: 1 Per Cylinder
Valve Lashes - Cold

Intake: 0.35mm, Exhaust: 0.45mm
Lubrication Method

Fully Forced Pressure Feed Type
Oil Pump

Gear Type Driven by Crankshaft
Oil Filter

Full Flow, Cartridge Type
Oil Pan Capacity

High Level: 7 litres, Low Level: 6 litres
Lubrication Angularity Limit

Front Down: 25 degrees, Front Up: 35 degrees, Side to Side: 35 degrees
Lubrication Oil

Refer to Operation Manual
Intake Valve Timing

Opening: 15°BTDC, Closing: 30°ABDC
Exhaust Valve Timing

Opening: 45°BBDC, Closing: 13°ATDC
Cooling Method

Fresh Water Forced Circulation
Water Capacity (Engine Only)

5.75 litres
Lid Minimum Pressure

70kPa
Water Pump

Centrifugal Type Driven by Belt
Water Pump Capacity

155L/min
Thermostat

Wax–pellet Type. Opening Temp. 72°C, Full Open Temp. 82°C
Cooling Fan

Plastic Blower. 450 mm diameter, 7 blades
Heat Rejection to Coolant

3.5 kcal/sec
Air Flow

3.4m3/min
Exhaust Gas Flow

9.2m3/min
Exhaust Gas Temperature

550 °C
Maximum Permissible Altitude

2000 m
Charging Generator

14V×35A
Voltage Regulator

Built-in IC Regulator
Starting Motor

12V×3.8kW
Battery Voltage

12V
Battery Capacity

120 AH
Categories: ,
From Leading Global Facilities Straight to Your Project Site

World-Class Manufacturing, Streamlined Distribution

At LiFeTIDE, we bypass intermediate brokers to align your business directly with the world’s most advanced powertrain and electrical component manufacturing facilities. We secure tier-one access to state-of-the-art production lines including the globally acclaimed SDEC and Baudouin facilities.

Every engine, alternator, and component we source is manufactured under stringent international quality controls and rigorously tested for the harsh operational profiles of Sub-Saharan Africa.

From individual component integration for local generator builders to turnkey commercial 3-phase setups, our managed logistics network ensures seamless factory-to-site delivery, guaranteed stock availability, and uncompromised engineering integrity.

Seamless Supply and Delivery Channels

Sub-Saharan Logistics Infrastructure

Managing heavy engineering components and high-capacity standby power systems across African borders requires absolute precision, established freight channels, and ironclad regulatory compliance.

At LiFeTIDE, our logistics framework is built to handle the complex weight of heavy industrial transport. We coordinate the entire lifecycle of your asset from secure international factory container loading and local port clearance to heavy-haul overland distribution.

Whether you are a generator builder in Johannesburg requiring bulk engine shipments or a registered trade dealer anywhere in Southern Africa, we have you covered.

Our cross-border freight routes are fully optimised to navigate customs frameworks, minimise port delays, and guarantee predictable delivery timelines directly to your facility or project site.

RELATED PRODUCTS

Compare
Quick view

SDEC 68kW Diesel Engine 4HT4.3-G22

FREQUENTLY ASKED QUESTIONS

Does the price include installation?

No, installation is not included in the price. Any qualified electrician can install the kit and provide a Certificate of Compliance (COC) for the installation as per legislation.

Do LiFeTIDE offer installation?

No, LiFeTide do not offer any installation services, but, any qualified electrician can install the Pre-Configured LiFeTIDE Loadshedding Kit.

Does the price include delivery?

Delivery is not included in any of the prices. However, delivery will be calculated in your cart at checkout based on your location and product selection.

Tell me about the Warranty

Our product warranty  is detailed on each product page and as per our standard terms if registered on our warranty form along with a valid COC and images of the installation. It is a limited warranty. The goods need to be returned to us as per our standard Terms and Conditions of Sale.

Price validity

All pricing is valid while stocks last as reflected on this website page for the product listed, as specified herein and subject to change without prior notification. Â